Happiness is a Car and the Open Road Card

1. Cover the 6 ½”x5” card with tan Rust & Revs paper. Place the card on the craft mat and use a blender brush to apply Muddy Boots ink on the edges and on the edges of “Happiness is a car and the open road.”

2. Cut ¾”x5” strip from the wood paper. Glue 3/8” from the left side of the card. Glue signs along the strip. Place brown/gold border Dazzles™ on each side of the strip.

3. Glue a small piece of vellum behind the windows of the red car laser cut. Foam tape the car to the bottom of the card. Foam tape the compass on the right side. Glue the “Happiness. . .” above the car.

4. Inside: Glue 5 1/8”x5” wood paper to the center. Place brown/gold border Dazzles™ on three sides. Glue vellum behind the card windows. Foam tape to the center bottom of the card. Glue mechanical die-cuts on each side, glue two wrenches on the right and a curved chain on the left.

5. Foam tape three stars above the card. Foam tape “I’m not old I’m a classic” from the chains. Trim 1/8” strip off the Dazzles™ and use to “hang” the wrenches.