Card front: Place your card with the fold on the left. Cover the card with Darkroom brown scuffed paper. Use VersaMark™ to stamp the camera in rows all over the card, in a brick-type pattern. Sprinkle on the "Sunflower Sparkle" Perfect Pearls&trade,; and brush evenly all over with the large brush. Brush off excess. Heat set with a heat gun. Cut narrow strips of gold mirror sheet (1/8" wide). Remove the backing and place them along all four edges of the card as shown, trimming any excess. Use Zips™ to secure a length of 1/2" wide black grosgrain ribbon across the card 2”. Cut out a 3 1/2"x2" piece of gold mirror and stamp a black camera near the left side. Mark three evenly spaced dots to the right of the camera to mark where the eyelets will go. Use the Crop-a-Dile to punch three 3/16" holes on the markings. Turn the setter pieces to C and 3 on the Crop-a-Dile. Place a camera eyelet in the first punched hole and set with the Crop-a-Dile (see Crop-a-Dile instructions for more details). Make sure the camera is straight before you squeeze the handles all the way (you could even use a bit of a Zot™ to hold it in place while setting). Repeat for the remaining 2 eyelets. Mat the piece on black cardstock with a 1/8" border and foam tape centered on the card, 7/8" from the top. Stamp "Focus on the Good Times" on gold mirror and trim to 1 ¼”x5/8”. Mat on black cardstock with a 1/8" border and foam tape just overlapping the lower right of the main camera focal. Zot™ a black grosgrain bow to the lower left of the focal as shown.
Card inside: Cut a piece of yellow marble paper to fit the inside. Stamp black cameras all around the edge, going off the edge of the paper. Using the same technique as on the front, place strips of gold mirror on all 4 sides, and then glue to the card.
eyelet setter or Crop-a-Dile
Card inside: Cut a piece of yellow marble paper to fit the inside. Stamp black cameras all around the edge, going off the edge of the paper. Using the same technique as on the front, place strips of gold mirror on all 4 sides, and then glue to the card.
eyelet setter or Crop-a-Dile