Friends Don't Let Friends Card
Card front: Place your card with the fold on the top. Glue 6 1/2"x1 1/2" of hammered gold across the top. Cover the rest of the card with Darkroom burgundy patterned paper. Punch out the four camera die-cuts shown and place them on newspaper. Spray with Gold Dust Glitter Spray (preferably outdoors) and let dry. Spray a second layer if desired. Let dry and set aside. Cut out a filmstrip from the filmstrip acetate. Back three sections with paper: the two side sections with the Darkroom brown text paper and the center with the Darkroom yellow marbled paper. Use strips of Ultra Clear Tape under the black frame borders to attach the paper. Trim the right side so that there is about 1 3/4" of the text paper remaining. Punch out the filmstrip die-cut, cut off the left 1 1/2" and glue to the right section, sandwiched between the acetate and the text paper, keeping the cut edge flush with the right edge of the card as shown. Stamp the greeting in the center section of the acetate. Glue the filmstrip across the card about 1/2" from the bottom and flush with the right edge. Trim off any excess on the left edge. Glue the other half of the filmstrip die-cut on the left side of the filmstrip, sandwiched between the acetate and the patterned paper (same as the right section) as shown. Glue the camera die-cuts along the top of the card as shown. Remove the prongs of the six Embellies™ brads shown by bending them back and forth repeatedly. Foam tape the brads around the greeting as shown.
Card inside: Cover the card inside with Darkroom horizontal striped paper. Cut one frame section of filmstrip acetate. Computer print or write "…friends stay with you to capture everything on camera!" onto a 2 3/4"x2 1/4" piece of Darkroom blue scuffed paper. I used Brannboll Fet 18pt font. Glue to the back of the acetate frame with Ultra Clear Tape along the black parts. Punch a 3/16" hole in the bottom right of the sentiment using the Crop-a-Dile. Turn the setter pieces to C and 3 on the Crop-a-Dile. Place a camera eyelet in the punched hole and set with the Crop-a-Dile (see Crop-a-Dile instructions for more details). Mat the filmstrip frame on hammered gold paper with a 1/8" border and glue to center. Remove the prongs of the "Smile" brad and foam tape to the lower left of the sentiment as shown.
Card inside: Cover the card inside with Darkroom horizontal striped paper. Cut one frame section of filmstrip acetate. Computer print or write "…friends stay with you to capture everything on camera!" onto a 2 3/4"x2 1/4" piece of Darkroom blue scuffed paper. I used Brannboll Fet 18pt font. Glue to the back of the acetate frame with Ultra Clear Tape along the black parts. Punch a 3/16" hole in the bottom right of the sentiment using the Crop-a-Dile. Turn the setter pieces to C and 3 on the Crop-a-Dile. Place a camera eyelet in the punched hole and set with the Crop-a-Dile (see Crop-a-Dile instructions for more details). Mat the filmstrip frame on hammered gold paper with a 1/8" border and glue to center. Remove the prongs of the "Smile" brad and foam tape to the lower left of the sentiment as shown.