Focus on the Good Times Card
Card front: Place your card with the fold on the left. Cut a piece of Moka suede paper to fit the front of the card. Use Zips™ to attach a length of teal sheer swirl ribbon across the piece 1/2" from the top, wrapping the ends around to the back. Do the same with teal narrow sheer ribbon just below the swirl ribbon. Zot™ a small sheer bow on the right side as shown. Glue the suede piece to the card. Cut a 4 1/8" square of Darkroom dark yellow patterned paper (with the filmstrip border). Cut four 4 1/2"x1/8" narrow strips of copper material from the Dazzles™ sheets. Use the Dazzles™ strips to mat each side of the square, framing it in copper. Trim excess and glue to the card centered, 1/2" from the bottom.
Punch out the first layer of the large Paper Tole camera and mat on Moka suede paper, leaving a 1/16" border. Glue to the center of the square. Assemble the remaining layers of the paper tole with foam tape. Remove the prongs of three large Embellies™ brads by bending them back and forth repeatedly (alternatively you can use a wire cutter to trim them off). Place foam tape on the back of the prongless brads and adhere them to the paper tole image as shown. Take the small tag from the Embellies™ and stamp "Focus on the Good Times" on it with Timber Brown StazOn®. Foam tape it to the upper left as shown. Remove the prongs of a small blue pearl brad and foam tape it to the end of the tag as shown.
Card inside: Cover the inside with Darkroom blue scuffed paper. Cover the bottom 2 3/4" with Darkroom maroon tiles paper. Back a small filmstrip Dazzles™ border with suede paper and glue it to the top of the maroon strip, trimming excess. Mat a camera Dazzles™ on suede with a 1/16” border, and glue it to the top left. Add a copper swirl Dazzles™ as shown.
Punch out the first layer of the large Paper Tole camera and mat on Moka suede paper, leaving a 1/16" border. Glue to the center of the square. Assemble the remaining layers of the paper tole with foam tape. Remove the prongs of three large Embellies™ brads by bending them back and forth repeatedly (alternatively you can use a wire cutter to trim them off). Place foam tape on the back of the prongless brads and adhere them to the paper tole image as shown. Take the small tag from the Embellies™ and stamp "Focus on the Good Times" on it with Timber Brown StazOn®. Foam tape it to the upper left as shown. Remove the prongs of a small blue pearl brad and foam tape it to the end of the tag as shown.
Card inside: Cover the inside with Darkroom blue scuffed paper. Cover the bottom 2 3/4" with Darkroom maroon tiles paper. Back a small filmstrip Dazzles™ border with suede paper and glue it to the top of the maroon strip, trimming excess. Mat a camera Dazzles™ on suede with a 1/16” border, and glue it to the top left. Add a copper swirl Dazzles™ as shown.