Fiesta Card
For the Front: Place the card with the fold on the left. Cover the card with black border paper with the border along the top and left sides as shown. Glue 5" x 3/4" of red floral paper across the bottom. Place web Dazzles™ border along the floral strip, trimming excess. Use the Design Tool #6 to cut a Small Label from red scallop paper. Glue to card 1/2" from the top and 1 3/4" from the right. Trim excess. Cut the inner oval of the Small Label using orange paper and mat on black with a 1/16" border. Foam tape centered to the red label. Back the large skull Dazzles™ with black, red floral, and teal floral papers as shown, and glue to the center of the orange oval. Place 3 pieces of black bling on the right side of the red label as shown. Cut a small Oval Tag from black border paper with a little bit of the border showing on the tip of the tag. Place the tag horizontal with the "bump" on the left. Place a single web Dazzles™ on the bottom of the oval and trim to fit. Place "Fiesta" and small heart in the center. Mat on orange paper with a 1/16" border and again on teal floral with a 1/16" border. Foam tape to card 1" from the bottom and 1/8" from the left. Place a piece of black bling on the end of the tag. Zot™ a small sheer teal bow on the end of the tag as shown.
On the dancing skeleton, back the tiny flower with red and the face and web with teal/black dot. Place on the card on the right side above the bottom strip as shown. Place a small web to the right of the skeleton on the edge of the card. Tie a bow with orange sheer swirl ribbon and Zot™ to the top right of the card. Use Zips™ to adhere ends of the bow to the edges of the card as shown. Trim excess.
For the Inside: Cut a 3" x 6 1/2" tall rectangle of black border paper with the border along the right side. Trace the Rounded Label onto the piece with the point on the opposite side as the border (it will go off the rectangle on the right side). Cut out the partial shape. Mat on red floral with a 1/8" border. Glue to the right side of the card. Place skeleton and heart Dazzles™ as shown.
On the dancing skeleton, back the tiny flower with red and the face and web with teal/black dot. Place on the card on the right side above the bottom strip as shown. Place a small web to the right of the skeleton on the edge of the card. Tie a bow with orange sheer swirl ribbon and Zot™ to the top right of the card. Use Zips™ to adhere ends of the bow to the edges of the card as shown. Trim excess.
For the Inside: Cut a 3" x 6 1/2" tall rectangle of black border paper with the border along the right side. Trace the Rounded Label onto the piece with the point on the opposite side as the border (it will go off the rectangle on the right side). Cut out the partial shape. Mat on red floral with a 1/8" border. Glue to the right side of the card. Place skeleton and heart Dazzles™ as shown.