Three Windows Birthday Card

For the front: Place your card with the fold on the top. Take the small postcards pattern sheet of scrapbooking paper and position your card across 3 vertical postcard images, with the center postcard more or less centered underneath your card. Trace around your card with a pencil, remove the card, and cut out the resulting rectangle. Now, glue this to your card making sure the center parts are adhered well, not just the outer edges. Open your card flat. Position the 3 1/2" tag die vertically, in the center of the card with the blades facing down and the bottom edge about 3/4" from the bottom. Place 2 small pieces of clear tape to secure the die to the card. Cut with your die-cutting machine. Carefully remove the pieces of clear tape and repeat this process with the left and right windows, positioning them about 1/4" away from the center window. Close your card. Cut 2 1/4" x 3/4" of light blue watercolor and emboss "Happy Birthday" in the center in copper. Mat on dark pink watercolor with a 1/16" border and glue to the back of the left window, about 1 1/4" from the bottom of the window (I used a small piece of Zips™ on each side to stick to the back of the window sides). Tie a small bow of sheer yellow ribbon around the column between the middle and right window. Zot™ in place. Do the same with narrow sheer purple ribbon, below the yellow as shown. Place a small row of Copper Jewel Dazzles™ on either side of the greeting as shown. Place large, medium, and small Jewel Dazzles™ on the top and bottom of the card, in between each window as shown.

For the inside. Cover the inside of the card with green watercolor paper. Emboss a lavender tag on dark purple watercolor, a leaf green tag on dark pink, and a copper tag on light blue. Cut out the three tags using the matching dies. Glue the lavender one on the left, lining it up with the window opening. Glue the copper in the center, and the leaf green one on the right (also lined up with their respective windows). Place 6 small Jewel Dazzles™ in a ring around the top of one of the tags. Place a medium Jewel Dazzles™ centered on top of the ring, to create a "floret." Do the same to the other two tags.